How To Fix Common Jewelry Problems

You can face jewelry problems no matter how expert you are in caring for your jewelry. You can anticipate some of them, but others will certainly catch you off guard. We all love our jewelry and want to take care of it, whether it’s expensive gemstones, beloved costume jewelry, or sentimental antique jewelry passed from generation to generation.

In this blog article, we’ll go over common jewelry problems, challenges when buying jewelry for others, and tips for avoiding problems and maintaining your jewelry from being rusted, scratched, or broken.

Are you ready for further reading? YES!

Let’s start!

So, What Is Common Jewelry Problems

Start with the most common jewelry problems that everyone has when it comes to owning jewelry. Some of these issues can be taken to avoid preventive actions, but others are just the result of wear and tear. As long as you’re aware of these difficulties, we’ve got suggestions for you to put in your back pocket if they ever arise for you.

1. Broken Prongs

Gemstones are usually set into jewelry with metal prongs or claws that secure them into the setting. Due to wear or damage to the jewelry, one or two of these will occasionally break off. If too many of them shatter, you eventually lose the diamonds they’re holding.

See More: couples promise rings

Solution: 

Check your jewelry on a regular basis for any signs of this, because jewelers or goldsmiths can easily add extra metal to the setting to save the stones.

2. Ring Getting Stuck

Isn’t that a scenario we’ve all imagined? When you try to take a ring off, it becomes stuck. When you wear a ring for a long time and your fingers swell, there is a possibility that the ring is too small for your actual size. While the scenario is alarming, there are several options for properly removing the ring without damaging it.

Ring Getting Stuck

Solution: 

Don’t freak out: It might be possible to remove the ring by twisting it gently. You should immediately stop if you face any resistance. Avoid hurting yourself throughout the procedure.

Use of Windex: Surprisingly, Windex is a popular household cleaning product that can be used to lubricate the finger and ring. Once you’ve done that, try pulling it off.

Lubricate: There are plenty of additional choices to try if that doesn’t work. Petroleum jelly, vegetable oil, cooking oil, liquid dish soap, lotion, or butter are some of the items we suggest.

Ice It: Reduce the temperature if you feel your finger is swollen. Start by immersing your entire hand in cold water for 10 minutes. Hold your hand above your head if you can to reduce the amount of blood flowing to it. As you begin to try to remove the ring, you may wish to apply some lubricant. You may have to attempt this process numerous times before getting it right.

Dental floss: This procedure entails putting dental floss under the ring’s band and then twisting it around your finger, concentrating on the area surrounding your knuckle.

Seek medical assistance: If everything fails, it may be necessary to seek medical help. Seek medical attention immediately once if your finger swells, or you begin to lose sensation in it.

3. Spinning Loose Rings

Another concern that arises from normal ring wear is this. It’s an indication that your band is about to fall apart. Make sure you don’t walk around with a loose ring that can fall off or trapped in anything as you walk when your ring loses or the settings twist often.

Knowing what to check for before losing one of your favorite pieces of jewelry will save you time and money. Fortunately, a professional jeweler can resize your ring by adding metal to the band, which can fix these problems.

Spinning Loose Rings

4. Ring Bands Wearing Down

Metal, like rusting, wears out through time and regular usage. When it comes to rings, this is especially true and a common jewelry problem. When two rings, such as a wedding band and an engagement ring wear together, they grind against each other and wear down the metal.

Rings tarnish with time as they come into contact with everything you touch. It usually happens on the bottom of the ring or on the sidewall where your rings touch together. You can observe that some portions of the band appear thinner than others, which is solid evidence that this is the reality. 

Solution: 

If you see this, it’s probably time to seek professional help. A specialist can simply fix a worn-down band – or shank, as that section of the ring is commonly known. The thin, fractured, or bent section of the ring will be taken out and replaced with thicker, more durable metal like gold, silver, and so on.

5. Bent Rings

A variety of circumstances can cause rings to bend which is common in jewelry problems. The metal weeks due to heat, cold, or excessive pressure. Some metals are softer than others, such as gold. Ending up with a twisted ring is more common than you would imagine.

Solution: 

  • Do not try to fix a bent ring on your own. That’s how most ring bands break. We recommend that you take it to a professional who can fix it without risking metal splitting or fracturing.
  • To avoid them from bending, remove your rings before doing any heavy work with your hands, especially if you wear soft metal like yellow gold or silver.

6. Tangled Necklace Chains

Reaching for the ideal necklace for your outfit only to discover it has become a tangled mess is one of the most aggravating aspects of jewelry owning. Most of us would like to avoid the chore of untangling jewelry if at all feasible. If we’re being honest, we’ve all been in that situation at least once or twice. 

Tangled Necklace Chains

Solution:

Untangling knots or restring a necklace might be difficult, but here are some tips to make things easier:

Sprinkle baby powder: Coat the entire chain in baby powder. You’ll want to use it frequently because it acts as an unusual lubricant to help in untangling it.

Use a safety pin or needle: If you can’t work out the knots with your fingers, you may use a safety pin or a needle to help things along.

Use Windex: Windex is an excellent option. Seriously, it’s a one-stop shop! Windex can help untangle necklaces in the same way it helps untangle a stuck ring.

Other lubricants, such as baby oil or vegetable oil, may also help in the process.

Stay calm: A little patience, above all else, may go a long way. This may be a time-consuming and difficult procedure. 

7. Lost Stones

Regularly inspect your favorite jewelry items to ensure they aren’t missing any gems or displaying any signs of damage that might lead to a future loss. The easiest approach to keep your jewelry in good condition is to keep it from becoming damaged.

If you have any jewelry with several stones, like this Tranquility Tree of Life Necklace, you may not notice if one of them is missing immediately. Make sure to take a few minutes every now and then to have a closer look.

A lot of the time, a reputable jeweler can easily replace lost or damaged stones. Once you identified the problem, you can usually fix it swiftly and cheaply which depending on the position of the lost gem.

8. Broken Chains & Clasps problem

The clasp is usually the first part of a necklace, watch, or bracelet to break. The clasp is a generic name for a necklace’s closure, although there are various different types of clasps. Hook, toggle, magnetic, spring, and lobster claw clasps are some of the most common jewelry problems.

A close second is broken links in a necklace chain. Even the most durable metal fades with time, and under the right conditions, one of them can easily shatter.

Broken Chains & Clasps

Solution: 

Fortunately, both of these issues are usually simple to fix jewelry problems.

Replace the link: A jeweler can readily repair most chains by simply replacing a broken link or putting in a new clasp on a precious thing. By contacting the right expert, even antique jewelry can be easily fixed.

Replace the entire chain: If the item is cheap or costume jewelry, you may wish to just replace the chain. If you’re looking for a replacement piece of handcrafted jewelry, you should contact the designer or maker directly. You can even use a set of jewelry pliers to replace a clasp or tweak a link if you’re working with sturdy metal.

9. Tarnished Silver Jewelry Problem

The oxidation of silver jewelry leads it to grow darker – or tarnished. There is a variety of factors, including your skin’s oils and the chemical treatments used on wooden surfaces. It’s impossible to predict what causes it, but you’ll probably see it on your jewelry from time to time. As you wear your favorite silver pieces more frequently, you’ll notice minor changes in their color.

Tarnished Silver Jewelry

Solution:

Warm water bath: The simplest solution is sometimes the best! Simply soak your jewelry in warm water with mild dish soap. Each piece should be soaked for at least 30 minutes, however, many pieces can be soaked together. After that, rinse the jewelry with clean water. Wipe the tarnished parts of the jewelry with a soft toothbrush. 

Silver polish: Your jewelry can be cleaned using special cleaners. They’re usually cheap and simple to get by, both online and in stores. While the liquid versions of these are possibly messy, you can buy small packs of disposable clothes and soak in the liquid for a quick and simple clean.

Lemon juice: You can make a solution for your tarnished jewelry by mixing 1 part lemon juice with 2 parts water. Adding a few drops of olive oil to the mix can also help preserve the metal. Only keep the pieces in the solution for 15 minutes at a time for this approach. Before you use the lemon juice, remember to dilute it. 

Baking soda: Mixing three parts baking soda and one part water to form a thick, white paste is another common way to clean your jewelry. Apply the paste to the wet jewelry with a clean, lint-free cloth and begin rubbing over the surface. To remove the tarnish, work the mixture into every area of the jewelry, including the nooks and crevices. Rinse the jewelry completely once you’ve removed most of it.

Visit a professional: If you have valuable, sentimental jewelry, it’s usually a good idea to spend a little money to have it professionally cleaned. If you’re worried that your at-home solutions won’t work, seek advice from your local jewelry retailers. This way your jewelry will be secure since it will be in the hands of someone who can restore the shine to your jewelry using expert procedures – such as ultrasonic cleaners! After all, a pound of cure is worth an ounce of prevention.

If the suggestions in this post are insufficient for you, you can also read how to care for your jewelry, come in and see it for yourself. After that, we can recommend the best ways to care for and clean your jewelry.

Go to the home page: couples jewelry

Leave a Comment

Top Products selling

0